CROWN Fatigue Breaks


Example: Severe crown wire breaks on a 10-strand overhead crane wire rope. Crown breaks originate at the OUTSIDE of the rope at the contact point between rope and sheave/drum.

Crown wire breaks on a Python® non-rotating
wire rope.


Remove the rope from service even if you find a SINGLE individual wire break which originates from inside of the rope. These so called VALLEY breaks have shown to be the cause for unexpected complete rope failures.

VALLEY Wire Breaks




Example: Valley wire breaks on a 8-strand overhead crane
wire rope.

Valley breaks originate INSIDE the rope. Condition of the inner strands of the same rope as above. The core has completely failed and immenent catastrophic rope failure will be the result.

A single valley wire break on a 19×7 rotation resistant rope. Condition of core under that same single valley break. Note the extreme notching of individual wire and the countless wire breaks. Such a condition is hidden under just a single (1) valley break!
FATIGUE wire breaks are typically squared off straight across the wire.TENSILE wire breaks are characterized by
their typical ‘cup and cone’ appearance.
On the right and left a typical cut-and-cone break pattern. The wires in the center of the photo are a combination of fatigue and shear break.

Lay Direction and Multiple Layer Damages

Damages caused by connection a right hand to a left hand lay rope

These 3 picture show what happens when you connect a left-lay rope to a right-lay rope, as done with this boom pendant extension. Both ropes are opening up to the point where the strands are nearly parallel to each other; they completely untwisted themselves and developed excessive wire breaks.

Damages caused by multiple layer winding

The result of such non-tensioning of the layers are looping of individual wires, completely crushed strands, total deterioration of a non-rotating rope due to gross neglect of inspection procedure.

NOTE: For a more indepth discussion on wire rope discard and inspection we suggest to attend our “Wire Rope” and “SlingMax® Rigger’s Mortis Seminar”. Call 1.800.457.9997 for details and dates.